请稍候...

Product

DownLoad Catalogue

  • Paramater
  • Standards
  • Installation
  • Download

Working Principle:

When the media flows into the valve, the ball automatically floats and blocks the valve exhaust port to prevent the media from expelled. When the gas is filled with valves, the ball falls down, the exhaust holes are opened, the air is discharged, the media rises automatically, and the ball floats and closes the valves.

 

Specifiction:

Bolt Cap;NBR or EPDM or ABS BALL Seal;

 

Technical Paramater:

Normal Size: DN15~DN50

Pressure Rate: DIN PN10/16

Working Temperature: 0℃~80℃

Working Medium: Water

 

 

Design: DIN 3352;

Manufacture: Factory STD;

Thread: NPT,BSP/BSPT,DIN STD;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Instructions:
1\ The valve’s rated parameters should match the equipment’s. Make sure that the valve’s rated flow satisfies the actual demand;
2\ The installer must be trained or experienced so as to operate the installation correctly;
3\ A thorough check after installation is needed to ensure no errors;
4\ A thorough cleaning before installation is needed (chemical reagent can be applied if it is necessary) to ensure that there is not any rusting or dirt in the pipe. All the filters must be removed before washing to keep the pipe smoothly open;
5\ When beginning to wash the system, it is suggested to install the valve on a temporary pipe. After finishing system cleaning, move the valve back and install it on the system’s pipe’
6\ Use pipe screw that meet the standard to connect the valve;

 

 

 

 

Simple Ball Automatic Air Valve(IQDXTH-SB)